Template:Infobox engine/doc

From The Global Wiki
< Template:Infobox engine
Revision as of 14:15, 22 November 2021 by en>WOSlinker (wiki-file-name for image)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This template is used in articles about engines, including, but not limited to automobile and industrial engines.

Usage

  • See the Parameters section of this document for basic explanations of what data to enter in each parameter.
  • See WikiProject Automobiles/Conventions for detailed explanations of what data to enter in certain parameters and instructions on how to correctly format the data.
  • When entering more than one data point per parameter, use the unbulleted list template {{ubl | fact one | fact two | et cetera }} to put each entry on a separate line. Do not use <br /> to create line breaks in the infobox.
  • In the infobox templates below, conversion templates have been provided for your convenience. After copying the infobox template into the article, enter the data, replacing "NNNN" with numeric entries. When entering data into the conversion template, enter digits without thousands separators; i.e. 4287 not 4,287.

Script error: No such module "Parameter names example".

{{Infobox engine
| name          = 
| image         = 
| caption       =
| manufacturer  = 
| aka           = 
| production    = 
| predecessor   = 
| successor     = 
| configuration = 
| displacement  = 
| bore          = 
| stroke        = 
| block         = 
| head          = 
| valvetrain    = 
| timing        = 
| compression   = 
| operating principle =
| supercharger  = 
| turbocharger  = 
| turboboostpressure =
| fuelsystem    = 
| management    = 
| fueltype      = 
| oilsystem     = 
| coolingsystem = 
| idle          =
| redline       =
| power         = 
| specpower     = 
| torque        = 
| length        = 
| width         = 
| height        = 
| diameter      = 
| weight        = 
| emissions level =
| emissions control =
}}

Parameters

name
Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
Examples: M104 or EcoBoost or N53 or Atlas
image
Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle
See WikiProject Automobiles/Images
manufacturer
Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)
designer
Person responsible for the development of the engine (this should be one or more natural persons)
aka
Other common or popular names used by the public or by the manufacturer in marketing materials
Examples: Cobra-Jet or Hemi
production
Calendar year range when the engine was produced, not the model year
Months are recommended if available, but exact dates are discouraged.
Examples: 1901 (1901)-1902 (1902) or January 1901 (1901-01)-February 1902 (1902-02) but not January 31, 1901 (1901-01-31)-February 28, 1902 (1902-02-28).
Use {{Start date|yyyy}}-{{End date|yyyy}} or {{Start date|yyyy|mm}}-{{End date|yyyy|mm}} where yyyy is the year and mm is the numeric month.
predecessor
Name of older or previous engine that was replaced by the engine listed in the Name field of the infobox
Leave blank if this does not apply.
successor
Name of newer or next engine that replaced the engine listed in the Name field of the infobox
Leave blank if this does not apply.
configuration
Arrangement and number of cylinders or rotors
Examples: Straight-6, Flat-4, V8 or W12. See Engine configuration.
displacement
Engine displacement in litres or cubic centimeters may be used where appropriate
Use {{convert|x.x|L|cuin|abbr=on}} where x.x is the displacement in liters or {{convert|xxxx|cc|cuin|abbr=on}} where xxxx is the displacement in cubic centimenters.
Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev|xxx}} where xxx is the displacement in cubic inches.
See WikiProject Automobiles/Conventions - Displacement.
bore
Measurement of the cylinder bore in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the bore in millimeters.
stroke
Measurement of the piston stroke in millimeters
Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the stroke in millimeters.
block
Material used to construct the engine block
Examples: cast iron or aluminum
head
Material used to construct the Cylinder head
Examples: cast iron or aluminum
valvetrain
Description of the valvetrain
Examples: DOHC, OHC or OHV
timing
Timing drive system
Example: belt, wet belt, chain, cambelt
compression
Engine compression ratio
Example: 10:1
operating principle
Engine operating principle
Examples: Diesel, Wankel
supercharger
Manufacturer, model and type of superchager if known, otherwise type of supercharger
Example of manufacturer, model and type: [[Eaton Corporation|Eaton]] R410 TVS roots type
Examples of types: Roots, Lysholm screw, Sliding vane or Scroll
Leave blank if this does not apply.
turbocharger
Number of turbochargers (single, dual, quad, etc.) and manufacturer and model if known, otherwise number of turbochargers
Example: Single [[IHI Corporation|IHI]] VF48 or Twin [[Honeywell]] GT15 or Quad [[IHI Corporation|IHI]] VN65
Leave blank if this does not apply.
fuelsystem
Fuel delivery system
Examples: carburetor, fuel injection
If carburetted, state make and model of carburetor if known.
Examples: [[Solex]] 34 or [[Weber carburettor|Weber]] 45
If fuel injected state make, model and characteristics of fuel injection system if known.
Example: [[Robert Bosch GmbH|Bosch]] [[Jetronic#KE-Jetronic (1985–1993)|KE-Jetronic]] electronically-controlled, mechanical fuel injection
management
Type of engine management system
Examples: Bosch Motronic, Digifant
fueltype
Fuel used to cause combustion or movement of the pistons
Examples: gasoline, diesel, steam etc.
oilsystem
Type of oil system
Examples: wet sump, dry sump, etc.
coolingsystem
Type of cooling system
Examples: air-cooled, water-cooled, oil-cooled, etc.
idle
Governed idle rpm i.e. the speed engine rotates under no load under minimal throttle to sustain engine functions.
redline
Redline i.e. the maximal speed engine is designed to be operated continuously at full throttle under load. Not to be confused with high idle and maximal governed RPM.
power
Engine power
For engines used in U.S. home market cars use {{convert|xxx|hp|kW|abbr=on}} where xxx is the power in horsepower (hp).
For engines used in Japanese home market cars use {{convert|xxx|PS|kW hp|abbr=on}} where xxx is power in metric horsepower (PS).
For engines used in British home market cars use {{convert|xxx|bhp|kW PS|abbr=on}} where xxx is power in brake horsepower (bhp).
For engines used in rest-of-world home market cars use {{convert|xxx|kW|hp|abbr=on}} where xxx is power in kilowatts (kW).
See WikiProject Automobiles/Conventions - Power.
specpower
Specific power
torque
Peak torque at a specified revolutions per minute (rpm)
For engines used in U.S. home market cars use {{convert|xxx|ft.lbf|Nm|abbr=on}} at yyyy rpm where xxx is the torque in foot-pounds and yyyy is the rpm.
For engines used in rest-of-world home market cars use {{convert|xxx|Nm|ft.lbf|abbr=on}} at yyyy rpm. where xxx is the torque in Newton meters and yyyy is the rpm.
See WikiProject Automobiles/Conventions - Torque.
length
Longest dimension of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the length in millimeters.
width
Shorter of the two length measurements of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the width in millimeters.
height
Maximum height of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the height in millimeters.
diameter
Diameter of the engine in millimeters
Use {{convert|xxxx|mm|in|abbr=on}} where xxxx is the diameter in millimeters.
Leave blank if this does not apply.
weight
Weight of the engine in kilograms
Use {{convert|xxx|kg|lb|abbr=on}} where xxx is the weight in kilograms.
emissions level
The most stringent emissions standard(s) the engine is tested to satisfy
If an engine has been certified multiple times, list the lowest and highest standard unless intermediate standards marked an important development step.
For engines used in U.S. home market cars use United States emission standards.
For engines used in EU common market cars use European emission standards.
For engines used in rest-of-world home market cars use the locally applicable standard.
emissions control
Technology employed to control emissions below target level
Examples: [[Secondary air injection|Air Injection]] or [[Exhaust gas recirculation|EGR]] or [[Catalytic converter]].

Example

Note
The data below may not reflect the actual specifications of the engine used for this example.


BMW S65B40O0
File:BMW S65 Engine.JPG
Overview
ManufacturerBayerische Motoren Werke AG (BMW)
Also calledMonster
Production2007–2013
Layout
Configuration90° V8
DisplacementScript error: No such module "convert".
Cylinder boreScript error: No such module "convert".
Piston strokeScript error: No such module "convert".
Block materialAluminumsilicon alloy
Head materialAluminum alloy
ValvetrainDOHC
Timing drive systemChain
Compression ratio12.0:1
Combustion
Fuel systemFuel injection
ManagementMSS60 ECU
Fuel typeGasoline
Cooling systemWater-cooled
Output
Power outputScript error: No such module "convert".
Torque outputScript error: No such module "convert".
Dimensions
LengthScript error: No such module "convert".
WidthScript error: No such module "convert".
HeightScript error: No such module "convert".
Dry weightScript error: No such module "convert".
Chronology
PredecessorBMW S54
SuccessorBMW S88
{{Infobox automobile engine
| name          = BMW S65B40O0
| image         = BMW S65 Engine.JPG
| manufacturer  = [[BMW|Bayerische Motoren Werke AG (BMW)]]
| aka           = Monster
| production    = 2007–2013
| predecessor   = [[BMW M54#S54B32|BMW S54]]
| successor     = BMW S88
| configuration = 90° [[V8 engine|V8]]
| displacement  = {{convert|3999|cc|L|1|order=flip|abbr=on}}
| bore          = 92 mm
| stroke        = 75.2 mm
| block         = [[Aluminum]]–[[silicon]] [[alloy]]
| head          = Aluminum alloy
| valvetrain    = [[DOHC]]
| timing        = Chain
| compression   = 12.0:1
| supercharger  = 
| turbocharger  = 
| fuelsystem    = [[Fuel injection]]
| management    = MSS60 [[Engine control unit|ECU]]
| fueltype      = [[Gasoline]]
| oilsystem     = 
| coolingsystem = [[Water-cooled]]
| power         = {{convert|309|kW|0}}
| specpower     = 
| torque        = {{convert|400|N.m|lb.ft|0|abbr=on}}
| length        = {{convert|734|mm|in|abbr=on}}
| width         = {{convert|505|mm|in|abbr=on}}
| height        = {{convert|611|mm|in|abbr=on}}
| diameter      = 
| weight        = {{convert|147|kg|lb|abbr=on}}
}}

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. Click here to see a monthly parameter usage report for this template based on this TemplateData.

TemplateData for Infobox engine

This template is used in articles about engines, including, but not limited to automobile and industrial engines.

Template parameters

This template prefers block formatting of parameters.

ParameterDescriptionTypeStatus
Namename

Name of the engine in the engine's original or primary market, as assigned by the entity responsible for the development of the engine (not necessarily the manufacturer of the engine)

Linerequired
Imageimage

Photograph of the engine, preferably in clean/as new condition, with accessories but not installed in a vehicle

Fileoptional
Image Sizeimage_size

no description

Stringoptional
Alt Text for Imagealt

Alt text for people who cannot see the image.

Stringoptional
uprightupright

no description

Unknownoptional
interiorimageinteriorimage

no description

Unknownoptional
Captioncaption

The caption field describes the engine pictured in the Image field above.

Stringoptional
Manufacturermanufacturer

Entity responsible for the development of the engine (not necessarily the manufacturer of the engine)

Stringsuggested
Designerdesigner

Person responsible for the development of the engine (this should be one or more natural persons)

Unknownoptional
akaaka

Other common or popular names used by the public or by the manufacturer in marketing materials

Stringoptional
Productionproduction

Calendar year range when the engine was produced, not the model year. Months are recommended if available, but exact dates are discouraged. Use {{Start date|yyyy}}-{{End date|yyyy}} or {{Start date|yyyy|mm}}-{{End date|yyyy|mm}} where yyyy is the year and mm is the numeric month.

Example
{{start date|1901}}-{{end date|1902}} or {{start date|1901|01}}-{{end date|1902|02}}
Unknownoptional
Configurationconfiguration

Arrangement and number of cylinders or rotors

Example
Straight-6, Flat-4, V8 or W12
Stringoptional
Displacementdisplacement

Engine displacement in litres or cubic centimeters may be used where appropriate. Use {{convert|x.x|L|cuin|abbr=on}} where x.x is the displacement in liters or {{convert|xxxx|cc|cuin|abbr=on}} where xxxx is the displacement in cubic centimenters. Cubic inches can be used to express the displacement of engines originally engineered, designated, and marketed in cubic inches, such as pre-1980s American and pre-1974 Australian engines. When using cubic inches, use {{Auto Lrev|xxx}} where xxx is the displacement in cubic inches.

Unknownoptional
Borebore

Measurement of the cylinder bore in millimeters. Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the bore in millimeters.

Unknownoptional
strokestroke

Measurement of the piston stroke in millimeters. Use {{convert|xx.xx|mm|in|abbr=on}} where xx.xx is the stroke in millimeters.

Unknownoptional
blockblock

Material used to construct the engine block

Unknownoptional
headhead

Material used to construct the cylinder head.

Unknownoptional
valvetrainvalvetrain

no description

Unknownoptional
Timing drive systemtiming

The part that synchronizes the rotation of the crankshaft and the camshaft(s)

Example
Belt, Wet belt, Chain, Gears
Stringoptional
compressioncompression

no description

Unknownoptional
idleidle

no description

Unknownoptional
redlineredline

no description

Unknownoptional
Operating principleoperating principle

The operating principle is a model that is characteristic of an engine's underlying thermodynamics; it is also known as the engine cycle. Typically, an operating principle has certain qualities that describe it, such as type of combustion (e. g. internal or external), type of ignition (e. g. compression ignition or spark ignition), and type of flame (e. g. premixed or diffusion). In internal combustion engines, common operating principles are, among others, [[Diesel engine|Diesel]], [[Otto cycle|Otto]], [[hot-bulb engine|Akroyd]], and [[Wankel engine|Wankel]].

Unknownoptional
superchargersupercharger

no description

Unknownoptional
turbochargerturbocharger

no description

Unknownoptional
fuelsystemfuelsystem

no description

Unknownoptional
managementmanagement

no description

Unknownoptional
fueltypefueltype

no description

Unknownoptional
oilsystemoilsystem

no description

Unknownoptional
coolingsystemcoolingsystem

no description

Unknownoptional
powerpower

no description

Unknownoptional
specpowerspecpower

no description

Unknownoptional
torquetorque

no description

Unknownoptional
lengthlength

no description

Unknownoptional
widthwidth

no description

Unknownoptional
heightheight

no description

Unknownoptional
diameterdiameter

no description

Unknownoptional
weightweight

no description

Unknownoptional
emissions levelemissions level

no description

Unknownoptional
emissions controlemissions control

no description

Unknownoptional
predecessorpredecessor

no description

Unknownoptional
successorsuccessor

no description

Unknownoptional